The crane beam shown here, was built in Miracle Welding Inc.’s custom steel fabrication facility. For use in the pre-cast industry, this beam is a support for a large gantry crane. It was constructed using A992 carbon steel and utilized many of our fabrication capabilities. Structural components where cut per the customer drawings, using saw and plasma cutting. The assembly was completed using MIG welding by our certified welders, who met tolerances of < 1/16″. This 5,000 lb. beam, was painted safety red in our shops painting facility, the finished product measured 16″ wide, by 40′-4″ in length.
We build three of these 80,000 lb. capacity beams per year. See the table below to learn more about this project or what Miracle can build for you.
- Capabilities Applied/Processes
-
Machining
Drilling
Welding
Saw CuttingPlasma Cutting
Mig Welding
Assembly
Fabrication
- Tightest Tolerance
-
< 1/16 in
- Material Type
-
A992 Steel
- Product Length
-
40′-4″ in length
- Product Width
-
16 in
- Whole Diameter
-
3.125 in
Weight 5,000 lb.Capacity 80,000 lb.
- Color
-
Safety Red
- Material Finish:
-
Paint
- Resistances
-
Oil
WaterGrease
Corrosion
- Special Features
-
ASME B30.20
ASME BTH-1NCCCO
- Industry for Use
-
Pre-Cast
- Volume
-
3 per year
- Standards Met
-
Our engineering prints
ISO
ASTM
AWS D1.1
AWS 14.1OSHA
ANSI
ASME
Safely Manual Supplied with Beams
- Product Name
-
Crane Beam
- Design Work (CAD Modeling, FEA, etc..)
-
CAD Modeling
- Drawing Type Accepted
-
BIM
SolidEdge
- Product Description
-
Large beams for gantry cranes. For “under the hook” material handling.